1. Pure Sine wave solar inverter with output power factor 1.0
2. PV Input Power Max 8000 W (2 tracker each 4000W)
3. High PV input voltage range 120-450 VDC
4. Built-in integrated MPPT module 120A
5. Battery independent design
6. Built-in anti-dust kit
7. Built-in WiFi for mobile monitoring (Android/iOS Apps available), removable LCD.
8. Parallel operation up to 6 units
Power system, communication system, railway system, outdoor equipment, etc
1.Pure sine wave solar inverter
2.Output power factor 1
3.High PV input voltage range.
4.Built-in MPPT solar controller Battery equalization function to optimize battery performance and extend lifecycle
5.Inverter running without battery
6.Built-in anti-dusk kit for harsh environment
7.Support multiple output priority: UTL, SOL, SBU, SUB
8.WIFI / GPRS remote monitorning ( Optional)
9.RS485 Communication for BMS ( Optional )
Line Mode Specification | VM 1.5K | VM 3K | |
Rated Output Power | 1500VA / 1500W | 3000VA / 2400W | |
Input Voltage Waveform | Sinusoidal(utility or generator) | ||
Nominal Input Voltage | 230Vac | ||
Low Loss Voltage | 170Vac±7V(UPS) | ||
90Vac±7V(Appliances) | |||
Low Loss Return Voltage | 180Vac±7V(UPS) | ||
100Vac±7V(Appliances) | |||
High Loss Voltage | 280Vac±7V | ||
High Loss Return Voltage | 270Vac±7V | ||
Max AC Input Voltage | 300Vac | ||
Nominal Input Frequency | 50Hz/60Hz(Auto detection) | ||
Low Loss Frequency | 40±1Hz | ||
Low Loss Return Frequency | 42±1Hz | ||
High Loss Frequency | 65±1Hz | ||
High Loss Return Frequency | 63±1Hz | ||
Output Short Circuit Protection | Circuit Breaker | ||
Efficiency(Line Mode) | >95%(Rated R load, battery full charged) | ||
Transfer Time | 10ms typical(UPS); 20ms typical (Appliances) | ||
Inverter Mode Specifications | |||
Output Voltage Wavaform | Pure Sine wave | ||
Output Voltage Regulation | 230Vac±5% | ||
Output Frequency | 50Hz | ||
Peak Efficiency | 91% | ||
Overload Protection | 5s@=150% load;10s@110%-150% load | ||
Surge Capacity | 2* rated power for 5 seconds | ||
Nominal DC Input Voltage | 12Vdc | 24Vdc | |
Cold Start Voltage | 11.5Vdc | 23.0Vdc | |
Low DC Warning Voltage | |||
@load <50% | 11.0Vdc | 22.0Vdc | |
@load >50% | 10.5Vdc | 21.0Vdc | |
Low DC Warning Return Voltage | |||
@load <50% | 11.5Vdc | 22.5Vdc | |
@load >50% | 11.0Vdc | 22.0Vdc | |
Low DC Cut off Voltage | |||
@load <50% | 10.2Vdc | 20.5Vdc | |
@load >50% | 9.6Vdc | 20.0Vdc | |
High DC Recovery Voltage Frequency | 14.0Vdc | 32Vdc | |
High DC Cut off Voltage | 16.0Vdc | 33Vdc | |
No Load Power Consumption | <25W | <30W | |
Charging Mode Specifications | |||
Charging Algorithm | 3-Step | ||
AC Charging Current (Max) | 60Amp | 60Amp | |
Bulk Charging Voltage Flooded Battery | 14.6 | 29.2 | |
14.1 | 28.2 | ||
Floating Charging Voltage AGM/Gel Battery | 13.5Vdc | 27Vdc | |
MPPT Solar Charging Mode | |||
Max PV Array Power | 2000w | 3000w | |
Nominal PV Voltage | 240Vdc | ||
PV Array MPPT Voltage Range | 90-430Vdc | ||
Max PV Array Open Circuit Voltage | 450Vdc | ||
Max Charging Current (AC charger plus solar charger) | 80Amp | 80Amp | |
Maximum Solar Charging Current | 80Amp | 80Amp | |
Safety Certification | CE | ||
Operating Temperature Range | -10℃~50℃ | ||
Storage Temperature | -15℃~60℃ | ||
Humidity | 5% to 95% Relative Humidity(Non-condensing) | ||
Dimension (D*W*H),mm | 348*270*95 | ||
Net Weight, kg | 4 | 5 |
Line Mode Specifications | SC-PS3K |
Rated Output Power | 3KVA / 2.4KW |
Input Voltage Waveform | Pure Sine wave |
Nominal Input Voltage | 230Vac |
Low Loss Voltage | 170Vac±7V(UPS) |
90Vac±7V(Appliances) | |
Low Loss Return Voltage | 180Va±c7V(UPS) |
High Loss Voltage | 280Vac±7V |